Skip to content
Commercial and spec jobs
Commercial job checklist.
Gather these before your submittal deadline and we can turn the package around quickly. Tick them off here or print the page.
Before you call
What we need from you
Most of it is in the spec section and the drawings. Send what you have and we’ll ask about the rest.
Start the day the job comes in
Submittal deadlines don’t move. Send this list in the first day or two of a commercial inquiry, not the day before submittals are due, and call Amy at 615-961-8470 if the date is close.
What you get back
A complete submittal package
From your spec section we put together the documents the architect needs to sign off on the metal.
- Panel profile data. Cross section, coverage and rib spacing
- Gauge confirmation. Material certificate matching the spec
- Color and finish sheets. The manufacturer’s color and finish data
- Fastener data. Pull-out and shear values from the manufacturer
- Clip spacing. Worked out for the wind uplift requirement
- Underlayment. Spec sheet for the high temperature underlayment
- Warranty documents. Material warranty, plus weather tightness where it applies
- Compliance sheets. UL and ASTM test data, such as ASTM E1592 and UL 580
- Details. Eave, rake, ridge, valley, headwall, transitions and penetrations
PAC-CLAD specified?
Start with the panel pages
Specs, PAC-CLAD’s install videos and links to their technical data are on the PAC-CLAD overview.
Certified PAC-CLAD roll formerOur PAC Contractors Association membership, Keystone QA and what the warranty covers.PAC-CLAD flashing detailsEave, rake, ridge, valley, walls and penetrations, step by step with photos from real jobs.Color chartsPAC-CLAD colors and the rest of the colors we run. Ask for a sample to see one in person.PAC-CLAD technical resourcesDrawings, test reports, load tables, specs and warranties, all on PAC-CLAD’s own site.Coil calculatorTurn coil weight into linear and square feet, and estimate clips for a standing seam roof.
Submittal due soon?
Send it over today
Email or call with the spec section and drawings. Amy is at 615-961-8470.
615-961-8470