Why metal roofing makes sense here.
What a metal roof gets the people who live under it, from the shop that forms the panels.
What a metal roof buys you
Most of the panels we form end up on jobs in Franklin, Brentwood and College Grove. Here’s what metal does for a home here.
A properly installed metal roof can last 60 to 80 years. It holds up to fire, hail and the wind storms that roll through Tennessee every spring.
Metal doesn’t crack, warp or rot the way asphalt shingles do, so there’s far less to patch and replace over the life of the roof.
Metal reflects the sun’s radiant heat. On a July afternoon in Franklin that can mean a smaller cooling bill.
Our panels and soffit are made with recycled steel, and they can be recycled again when the roof finally comes off.
A clean standing seam roof looks sharp and keeps looking that way, and both can help a home’s resale value.
Flashing that matches the roof
Roofs leak at the pipes, vents and chimneys first. We bend that flashing in the shop too, in the same steel and color as your panels.
See trim and flashing

Real people, one shop, right here
Every panel and piece of trim is run and bent on Lebanon Rd by the people in this photo. Call with a cut list and you’ll talk to the people who run it.
Meet the teamFormed in Mt. Juliet, on roofs down the road



The questions homeowners ask first
What does a metal roof cost in Tennessee?
It depends on the panel (standing seam or exposed fastener), the gauge, and the size and shape of the roof. Metal costs more up front than shingles, but it can last 60 years or more, which makes it the cheaper roof over time.
Metal or shingles: which is cheaper?
Shingles cost less to put on. Over the 60-year life of one metal roof, though, a shingle roof may need replacing three or four times. Over the life of the home, metal almost always comes out ahead.
Which gauge should I pick?
We run panels in 24 and 26 gauge. 24 is the heavier of the two and stands up better to hail and impact. 26 costs less, and we’ll help you match the gauge to the job.
Can a tornado take off a metal roof?
Installed correctly, metal roofs carry very high wind-uplift ratings, often above 140 mph. That makes metal one of the safest choices where high winds and tornadoes happen.
Do I need underlayment under metal?
Yes. A good underlayment, felt or modern synthetic, is a second barrier against moisture and helps stop condensation. We stock what you need.
Everything for the roof, from one counter
Panels
Standing seam panels, roll formed to the lengths on your cut list.
See panel profiles →Trim and flashing
Matching trim, drip edge and flashing, bent in our shop in the same color as your panels.
See trim profiles →The rest of the job
Underlayment, fasteners, clips, sealants and pipe boots, so the whole order comes from one place.
See accessories →Send us your takeoff
Call the shop, or send your takeoff with an order form and we’ll get you a price.
615-961-8470