Standing seam metal roofing panels for Spring Hill roofers
We roll-form standing seam panels and bend the matching trim in Mt. Juliet, then send them to Spring Hill jobs on both sides of the county line. Most orders are ready in 1 to 2 days.
Your cut list, formed and on the truck
When a Spring Hill plan calls for metal on a porch, a bay or a whole pavilion, the roofer usually needs it quickly and needs the trim to match, so we form both on the same order.
We don’t install roofs. We form the panels, bend the trim and sell both to the roofers and builders who do. Send a takeoff or a cut list, then pick the order up at the shop or have us bring it to the job.
- Lead time
- 1 to 2 daysmost panel orders
- Panel gauges
- 24 & 26 gasteel, roll formed in-house
- PAC-CLAD
- .032 & .040aluminum, plus 24 ga steel
- Forming panels
- Since 2011Mt. Juliet, TN
Standing seam on a Spring Hill job
A community pavilion and a row of pool cabanas on the northeast side of town, roofed in standing seam. More Spring Hill jobs go up here as they finish.
Northeast Spring HillAmenity pavilion
- Job
- Commercial
- Northeast Spring Hill
Pool cabanas
- Job
- Commercial
- Northeast Spring Hill
Panels going on
- Job
- Commercial
Installed by our roofing customers.
See the full gallerySpring Hill jobs on the map
Each pin is a neighborhood where a roofer put up panels from our shop.
The map loads as you scroll here.
- East Spring Hill
- Northeast Spring Hill
Pins mark the neighborhood, never the house.
“MF is a locally owned outfit that I would recommend to anyone over using the large corporately run distributors. You get a personal touch and service that others just can’t compete with.”
Ben H. · Google
“All of their attention to detail, follow up, customer service, is second to none, not to mention their pricing is legitimately the best in middle Tennessee.”
Ryan G. · Google
“I only drew the measurements of my metal pieces on a piece of paper and Gio took care of everything to make it perfect 10/10”
Lisa C. · Google
“…I ran a little short. Amy came through for me the same day and I was able to get everything completed.”
Kristie T. · Google
“Customer Service in companies has taken a hit in the last few years, I dread needing assistance. But not when I call Metal Formers. You are always super helpful and I don’t get transferred to different departments.”
M. E. · Google
“Giovanni was so helpful with making sure my delivery was available on time for our home project to be done.”
Carrie O. · Google
Spring Hill design numbers
Spring Hill runs its own Codes Department for the whole city, Maury County side included, so these numbers hold on either side of the line.
| Design wind speed | 105 mphUltimate design wind speed from the city’s design criteria table (IRC Table R301.2). The table doesn’t name an ASCE 7 edition. |
|---|---|
| Ground snow load | 16 psfSame table. Frost depth is 12 inches, and the city doesn’t require ice barrier underlayment. |
| Building code | Check with CodesOrdinance 26-07 set the 2024 IRC and IBC to take effect June 1, 2026, and the city posts its 2024 amendments on its Resources page. Its Building Codes page still lists 2018, so confirm the edition with Codes at 931-451-0940 before you submit plans. |
| Roof pitch on new homes | 6:12 minimumSpring Hill’s residential design standards call for a 6:12 minimum pitch and 1 ft overhangs on the primary roof (R802.4.2). |
| Re-roof permits | Ask Codes firstThe city’s permit FAQ covers work that alters or repairs a building and lists no exemption for roofs. Codes can confirm at 931-451-0940. |
Which of our panels fit Spring Hill work
1.5″ snap lock (SS4-450)
24 ga Kynar 500 · 26 ga SMP or Galvalume
The everyday panel for porch roofs, bays and full roofs on new homes, including the 6:12 and steeper main roofs Spring Hill requires.
2″ mechanical seam (SSQ210)
Seamed on the roof
For pavilions, amenity buildings and low slopes. The seam is closed with a seamer on the roof, so it handles long runs and shallow pitches.
1″ flush wall (FWQ100)
Wall, soffit and underdeck
Soffits, porch ceilings and accent walls in the same color as the roof, so the whole elevation matches.
Clips, screws and high-temp underlayment ship on the same order. Uplift depends on the panel, the clip spacing and the deck, so if the plans call out a rating, send that sheet with your takeoff.
What’s going on roofs around Spring Hill
We only have a few labeled Spring Hill jobs so far, so this is what roofers ordered for Spring Hill, Thompson’s Station and Nolensville together.
- Matte Black11 jobs nearby
- Dark Bronze10 jobs nearby
- Charcoal3 jobs nearby
- Burnished Slate3 jobs nearby
- Deep Black3 jobs nearby
Swatches are close, not exact. Screens vary, so ask for a steel sample before you order.
See every colorQuestions from Spring Hill roofers
Do you deliver metal roofing panels to Spring Hill?
Yes. We deliver to job sites all over Spring Hill, on the Williamson and the Maury County side, or you can pick up at the shop at 9485 Lebanon Rd in Mt. Juliet. Most panel orders are ready in 1 to 2 days.
Does Metal Formers install metal roofs in Spring Hill?
No. We form standing seam panels and bend trim, and we sell them to roofers and builders. If you’re a homeowner, your roofer can order from us.
Do I need a permit for a metal roof in Spring Hill?
Spring Hill’s Codes Department issues permits for the whole city, Maury County side included. Its FAQ says permits cover work that alters or repairs a building and doesn’t exempt roofs, so call Codes at 931-451-0940 before a re-roof. On a new home, the roof is part of the building permit.
What wind speed and snow load does Spring Hill use?
The city’s design criteria table lists a 105 mph design wind speed, a 16 psf ground snow load and a 12 inch frost depth. Your plans and the panel’s install guide set the clip spacing from there.
Can you roll long panels on a Spring Hill jobsite?
Yes. If the coil can be delivered to your site, we’ll bring the portable roll former and run the panels there. It beats hauling long panels down the interstate. See jobsite panel runs.
Can I see a color before I order?
Yes. Ask for a steel sample and hold it up against the brick or siding. Across Spring Hill, Thompson’s Station and Nolensville, matte black and dark bronze are what roofers order most.
How do I place an order?
Send a takeoff or cut list with an order form, or call Amy at 615-961-8470, Monday to Friday, 7 AM to 4 PM.
Next door to Spring Hill
Same trucks, same lead time.
Send us your Spring Hill takeoff
Call Amy at the shop Monday to Friday, 7 AM to 4 PM, or send your takeoff with an order form. Want to see the color first? Request a sample.
615-961-8470