Standing seam metal roofing panels for Nolensville roofers
Matte black porch roofs, bell-curved bays and the occasional full metal roof. We form the panels and bend the trim in Mt. Juliet for the roofers who put them on Nolensville homes.
Black and bronze, mostly on the front
A lot of what we send to Nolensville ends up on the front of a new house: a brick or stone elevation with black or bronze standing seam over the porch and the bay windows.
Accent roofs that small are mostly trim. Headwall, sidewall, drip edge and the short pieces around a bay all have to line up with the brick. We bend all of it on the same order and in the same color as the panels, so the crew isn’t waiting on a second trip.
We sell to roofers and builders and don’t install. Building in Nolensville and want metal on the front? Have your roofer send us the takeoff.
- Lead time
- 1 to 2 daysmost panel orders
- Panel gauges
- 24 & 26 gasteel, roll formed in-house
- PAC-CLAD
- .032 & .040aluminum, plus 24 ga steel
- Forming panels
- Since 2011Mt. Juliet, TN
Recent Nolensville jobs
Panels and trim from our shop on Nolensville houses.
South NolensvilleFull metal roof
- Job
- New home
- Color
- Burnished Slate
- South Nolensville
Low roof on white brick
- Job
- Home
- Color
- Dark Bronze
- West Nolensville
Porch roof
- Job
- New home
- Profile
- 1.5″ snap lock
- Color
- Matte Black
- East Nolensville
Low roof along brick
- Job
- Home
- Color
- Charcoal
Installed by our roofing customers.
See the full galleryNolensville jobs on the map
Most of our Nolensville work sits in a few newer neighborhoods west of town.
The map loads as you scroll here.
- West Nolensville (16 jobs)
- East Nolensville (2 jobs)
- South Nolensville (2 jobs)
- North Nolensville
- Northwest Nolensville
Pins mark the neighborhood, never the house.
“MF is a locally owned outfit that I would recommend to anyone over using the large corporately run distributors. You get a personal touch and service that others just can’t compete with.”
Ben H. · Google
“All of their attention to detail, follow up, customer service, is second to none, not to mention their pricing is legitimately the best in middle Tennessee.”
Ryan G. · Google
“I only drew the measurements of my metal pieces on a piece of paper and Gio took care of everything to make it perfect 10/10”
Lisa C. · Google
“…I ran a little short. Amy came through for me the same day and I was able to get everything completed.”
Kristie T. · Google
“Customer Service in companies has taken a hit in the last few years, I dread needing assistance. But not when I call Metal Formers. You are always super helpful and I don’t get transferred to different departments.”
M. E. · Google
“Giovanni was so helpful with making sure my delivery was available on time for our home project to be done.”
Carrie O. · Google
Nolensville design numbers
Nolensville has its own Building Codes Department. Here’s what its design table and permit rules say.
| Design wind speed | 115 mphFrom the town’s design criteria table (IRC Table R301.2) on its building codes page. The table doesn’t name an ASCE 7 edition. |
|---|---|
| Ground snow load | 10 psfSame table. Frost depth is 12 inches, and ice barrier underlayment isn’t required. |
| Building code | 2018 IRC and IBCThe town’s building codes page says it has begun a two-year process of adopting the 2024 codes. No effective date yet. |
| Re-roof permits | Not needed for mostNolensville’s amendment to IRC R105.2 drops the permit for a re-roof unless structural parts of the roof are replaced. New homes and additions still need one. |
| Historic district | Ask the town firstThe Historic Zoning Commission issues Certificates of Appropriateness for exterior work in the historic district. We found no published rule on roof materials. |
Which of our panels fit Nolensville work
1.5″ snap lock (SS4-450)
24 ga Kynar 500 · 26 ga SMP or Galvalume
The profile on most of our labeled Nolensville porch roofs and bays. It snaps together, which suits small accent roofs with lots of short panels.
1.75″ snap lock (SSQ675P)
Taller seam, same gauges
A taller seam with a heavier shadow line, for a front elevation where the metal is meant to stand out.
1″ flush wall (FWQ100)
Wall, soffit and underdeck
Soffits, porch ceilings and accent walls, in the same colors as the roof panels.
Clips, screws and high-temp underlayment ship on the same order. Uplift depends on the panel, the clip spacing and the deck, so if the plans call out a rating, send that sheet with your takeoff.
Nolensville picks black and bronze
Counted from Nolensville jobs where we know the color. Matte Black and Dark Bronze are tied at the top.
- Matte Black7 labeled jobs
- Dark Bronze7 labeled jobs
- Charcoal3 labeled jobs
- Burnished Slate2 labeled jobs
- Extra Dark Bronze1 labeled job
- Deep Black1 labeled job
Swatches are close, not exact. Screens vary, so ask for a steel sample before you order.
See every colorQuestions from Nolensville roofers
Do I need a permit to re-roof in Nolensville?
Usually not. Nolensville’s amendment to the residential code drops the permit for a re-roof unless structural parts of the roof are being replaced. New homes and additions still go through the town’s Building Codes Department.
What design wind speed does Nolensville use?
115 mph, with a 10 psf ground snow load and a 12 inch frost depth, from the town’s design criteria table. Nolensville is on the 2018 IRC and IBC for now and says it’s working toward the 2024 codes.
What colors are most common on Nolensville houses?
Matte Black and Dark Bronze, about evenly. Charcoal and Burnished Slate come next. See every color or ask for a steel sample.
Can you make trim for a bell roof or a curved bay?
We bend the drip edge, headwall and sidewall trim to your measurements in the panel color. Send the bay’s dimensions with the takeoff and note that it’s a bell roof, and we’ll call if anything needs a closer look.
Does Metal Formers install roofs in Nolensville?
No. We make the panels and trim and sell them to roofers and builders. If you’re a homeowner, your roofer can order from us.
How fast can I get panels to a Nolensville job?
Most panel orders are ready in 1 to 2 days. Pick them up at the shop in Mt. Juliet, or we’ll deliver to the lot. Call Amy at 615-961-8470 to set it up.
Around Nolensville
We deliver to all of these from the same shop.
Price your Nolensville porch roof
Send the takeoff with an order form, or call Amy at the shop Monday to Friday, 7 AM to 4 PM. Not sure about the color? Request a sample and hold it up to the brick.
615-961-8470