Franklin, TN · Williamson County

Standing seam panels and trim for Franklin roofers

We roll-form standing seam panels and bend the matching trim in Mt. Juliet, then send them to Franklin jobs in the historic district and well past it. Most orders are ready in 1 to 2 days.

Call615-961-8470Pickup in Mt. Juliet or delivery to your site
For Franklin crews and builders

Metal on the porch, shingles on the rest

A lot of Franklin houses carry metal even when the main roof is shingle. It goes over the front porch or a farmhouse gable, and it has to match the trim and gutters around it. We cut the panels to length and bend that trim in the same color, so it all ships on one order.

We sell to the roofers and builders who put the metal up. We don’t install it ourselves. Send a takeoff or a cut list, then pick the order up at the shop or have us bring it to the job. Working with an HOA or the historic commission? Ask for a sample and hold real steel up against the house before anyone signs off.

  • Standing seam roof panels, snap-lock and mechanically seamed
  • Flush wall and soffit panels
  • Drip edge, rake, ridge, headwall, sidewall and valley trim
  • Copper flashing, gutters and custom fabrication
Lead time
1 to 2 daysmost panel orders
Panel gauges
24 & 26 gasteel, roll formed in-house
PAC-CLAD
.032 & .040aluminum, plus 24 ga steel
Forming panels
Since 2011Mt. Juliet, TN
Local specs

Franklin code numbers

Franklin’s Building and Neighborhood Services covers addresses inside city limits, so check where the job sits first. Out in unincorporated Williamson County the rules change: the county building official wrote in August 2025 that the county enforces the 2021 IRC and doesn’t require a permit for residential roof repairs or replacements. Inside the city, here’s what matters for a metal roof.

Building code2024 IRC and IBCThe city’s adopted codes page puts the 2024 codes in effect on January 1, 2026. The aldermen adopted them on October 14, 2025 (Ord. 2025-40 for the IRC, Ord. 2024-44 for the IBC). Plans submitted before January 1, 2026 are reviewed under the 2018 code.
Re-roof permitsCall before you startThe city’s construction permit page says a permit is required for new construction, additions, renovations and most repair work, and doesn’t set a re-roof threshold. Building and Neighborhood Services answers that question at 615-794-7012.
Historic districtCOA for roofing changesInside the Historic Preservation Overlay, any roofing alteration other than in-kind repair needs a Certificate of Appropriateness. The design guidelines (effective May 30, 2022) list standing seam metal for additions, new buildings and outbuildings, and 5V metal for additions and outbuildings. On a historic roof, replacement material has to match the original in composition and appearance. The Preservation Planner is at 615-550-6795.
Work hours7 to 6 weekdays, 9 to 6 SaturdayOn any job that needs a city permit, Sec. 12-1301 of the municipal code names roofing as construction activity. No permitted work on Sundays or city holidays, and crews can’t show up more than 15 minutes early.
Wind and snow loadsOff your plansFranklin’s IRC amendments don’t publish a wind or snow table, so take them from the stamped plans. If the plans call out an uplift rating, send that sheet with your takeoff.

Which of our panels fit Franklin work

1.5″ snap lock (SS4-450)

24 ga Kynar 500 · 26 ga SMP or Galvalume

The everyday panel for porch roofs, bays and accent roofs over a shingle house.

2″ mechanical seam (SSQ210)

Seamed on the roof

For low slopes, long runs and full metal roofs. The seam gets rolled closed on the roof, which is what you want on a big span or a commercial building.

1″ flush wall (FWQ100)

Wall, soffit and underdeck

Porch ceilings, soffits and accent walls in the same color as the roof.

Trim for shingle roofs

Bent to your dimensions

Where the metal porch roof meets the shingles, you need headwall, sidewall and valley trim that matches both. Send a sketch and we’ll bend it with the panels.

Clips, screws and high-temp underlayment ship on the same order. Our 24 ga Kynar 500 coil from CMG carries a 40-year paint warranty.

Franklin FAQ

Questions from Franklin roofers

Do you deliver metal roofing panels in Franklin?

Yes. We deliver to job sites in Franklin and across Williamson County, or you can pick up at the shop at 9485 Lebanon Rd in Mt. Juliet. Most panel orders are ready in 1 to 2 days.

Does Metal Formers install metal roofs in Franklin?

No. We form standing seam panels and bend trim, and we sell them to roofers and builders. If you’re a homeowner, your roofer can order from us.

Do I need a permit for a metal roof in Franklin?

Inside city limits, the city says a permit is required for new construction, additions, renovations and most repair work, and it doesn’t set a re-roof threshold. Call Building and Neighborhood Services at 615-794-7012 before you start. In unincorporated Williamson County, the county doesn’t require a permit for residential roof repairs or replacements.

Can I put standing seam on a house in Franklin’s historic district?

Often, with approval. Any roofing change other than in-kind repair needs a Certificate of Appropriateness. The Franklin Historic District Design Guidelines list standing seam metal for additions, new buildings and outbuildings. On a historic roof, the new material has to match the original in composition and appearance. Call the Preservation Planner at 615-550-6795 before you order.

Which building code does Franklin use?

Franklin adopted the 2024 IRC and IBC on October 14, 2025, and they took effect January 1, 2026. Plans submitted before that date are reviewed under the 2018 code.

What hours can a roofing crew work in Franklin?

On jobs that need a city permit, Monday to Friday from 7 AM to 6 PM and Saturday from 9 AM to 6 PM. No permitted work on Sundays or city holidays. That’s two hours longer than our shop stays open.

Can you roll long panels on a Franklin jobsite?

Yes. If the coil can be delivered to your site, we’ll bring the portable roll former and run the panels there. It saves hauling long panels down I-65. See jobsite panel runs.

How do I place an order?

Send a takeoff or cut list with an order form, or call Amy at 615-961-8470, Monday to Friday, 7 AM to 4 PM.

Nearby

Also in Williamson County

Same trucks, same lead time.

Other town pages

Every town we deliver to
Ready to price it?

Send us your Franklin takeoff

Call Amy at the shop Monday to Friday, 7 AM to 4 PM, or send your takeoff with an order form. Want to see the color first? Request a sample. En español: metalformersinc.com/es.

615-961-8470