PAC-CLAD technical

PAC-CLAD technical resources.

Drawings, test reports, load tables, specs and warranties. Here’s where PAC-CLAD keeps each one, and what it covers.

Call Amy615-961-8470Certified PAC-CLAD roll former in Mt. Juliet, TN

Where to find it

The documents behind a PAC-CLAD submittal

PAC-CLAD publishes all of these. The links open PAC-CLAD’s own pages, so you always get the current version.

PAC-CLAD catalogEvery PAC-CLAD roof, wall, soffit and gutter product, with colors and finishes, in one PDF.CAD and PDF drawingsInstallation and flashing details by panel and substrate.TestingUL, ASTM, FM, Florida Product Approval and Miami-Dade reports.Load tablesAllowable spans and clip spacing by panel, gauge and clip.BIM objectsRevit families for the panel systems.SpecificationsThree-part CSI specs for each system.Safety data sheetsSDS for PAC-CLAD steel and aluminum.Shop drawing requestAsk PAC-CLAD for project shop drawings.

Metal Formers is a certified PAC-CLAD roll former. Product specs on these pages come from PAC-CLAD by Petersen and link back to PAC-CLAD’s own pages. PAC-CLAD, Tite-Loc, Tite-Loc Plus and Snap-Clad are trademarks of Petersen Aluminum Corporation.

Testing

What the test numbers mean

These are the tests you’ll see in a PAC-CLAD spec. Which ones a panel has passed is listed on each panel page and in PAC-CLAD’s test reports.

Test	What it checks
UL 580 Class 90	Wind uplift resistance of the roof assembly. Class 90 is the top rating.
ASTM E1592	Structural uplift performance of the panel and clip under uniform pressure.
ASTM E283	Air leakage through the wall or roof system.
ASTM E331	Water getting through the system under wind driven pressure.
ASTM E330	Structural performance of wall panels under wind load.
FM Approvals	Factory Mutual approval for wind and fire, often required by commercial insurers.
Florida Product Approval and Miami-Dade	High wind approvals used across the coast and by many specifiers.

Warranties

PAC-CLAD warranties

Warranty terms change, and the weather tightness warranty is set up project by project. Read the current terms on PAC-CLAD’s site before you bid.

Finish warranty

PAC-CLAD’s 70% PVDF finish carries a non-prorated warranty against fading, chalking and film failure within the limits PAC-CLAD sets. On steel and aluminum that’s 35 years, except Cardinal Red and Award Blue, which carry shorter coverage.

Weather tightness warranty

A project specific warranty on qualifying standing seam roofs. It calls for PAC-CLAD panels and flashings, PAC-CLAD HT underlayment or an approved equal, a PAC-CLAD approved installer, a project review before bid and inspections during the job.

Our flashing details guide walks through the details PAC-CLAD expects. Read PAC-CLAD’s warranty page.

On our site

Panels, details and tools

Each PAC-CLAD panel has its own page with specs and PAC-CLAD’s install videos. Start at the PAC-CLAD overview.

Certified PAC-CLAD roll formerOur PAC Contractors Association membership, Keystone QA and what the warranty covers.PAC-CLAD flashing detailsEave, rake, ridge, valley, walls and penetrations, step by step with photos from real jobs.Color chartsPAC-CLAD colors and the rest of the colors we run. Ask for a sample to see one in person.Coil calculatorTurn coil weight into linear and square feet, and estimate clips for a standing seam roof.Commercial job checklistWhat to send us before your submittal is due.

Putting a submittal together?

We can help with the paperwork

Send the spec section and we’ll pull the PAC-CLAD data you need for it. Call Amy at 615-961-8470.

615-961-8470

Commercial job checklist Order forms