Shop tools

Coil calculator.

Turn coil weight into linear feet and square feet, or work it backward. Then estimate the clips for a standing seam roof.

Coil converter

Weight, length and square feet

Pick the metal, the gauge and the coil width, then enter what you know. The numbers update as you type.

Linear feet0LF
Square feet0sq ft of coil
Weight0lb
Weight per foot0lb per LF

Uses nominal thickness for each gauge and standard densities (steel 0.2836, aluminum 0.0975, copper 0.323 lb per cubic inch). Real coils vary a little, so use the mill cert or the coil tag for anything you’re billing.

Clip calculator

How many clips for a standing seam roof

Enter the panel coverage, the total length of panel and the clip spacing.

Clips0before extras
Roof covered0sq ft

Clips = total panel length × 12 ÷ spacing. Add extras for starts, ends and high wind zones. Clip spacing comes from the PAC-CLAD load table for your panel and wind load, so check it before you order.

Ordering coil or panels?

Send us the numbers

Call Amy at 615-961-8470 with your coil width, gauge and color, or send a takeoff with an order form.

615-961-8470