Nashville, TN · Davidson County

Standing seam panels and trim for Nashville roofers

We roll-form standing seam panels and bend the matching trim in Mt. Juliet, then send them to Nashville jobs from Antioch to Whites Creek. Most orders are ready in 1 to 2 days.

Call615-961-8470Pickup in Mt. Juliet or delivery to your site
For Nashville crews and builders

Panels for the house, coping for the parapet

A week of Nashville orders can include metal over a porch on an East Nashville infill house and coping for a flat-roofed commercial building downtown. We form the panels and bend the trim for both, and they can ship on the same order.

We sell to the roofers and builders who put the metal up. We don’t install it ourselves. Send a takeoff or a cut list, then pick the order up at the shop or have us bring it to the job.

  • Standing seam roof panels, snap-lock and mechanically seamed
  • Flush wall and soffit panels
  • Coping, counter flashing and parapet trim for flat roofs
  • Copper flashing, gutters and custom fabrication
Lead time
1 to 2 daysmost panel orders
Panel gauges
24 & 26 gasteel, roll formed in-house
PAC-CLAD
.032 & .040aluminum, plus 24 ga steel
Forming panels
Since 2011Mt. Juliet, TN
Local specs

Nashville code numbers

Metro Codes covers Nashville and most of Davidson County. Satellite cities like Belle Meade, Berry Hill, Forest Hills, Oak Hill and Goodlettsville are their own towns, so check permits with that city. Inside Metro, here’s what matters for a metal roof.

Building code2024 IRC and IBCMetro adopted the 2024 codes with local amendments in ordinance BL2025-898. They apply to plans submitted after July 16, 2025.
Re-roof permitsOver ⅓ of the roofMetro’s permit list says a new layer of roofing, or replacing more than a third of the roof, needs a permit on houses and commercial buildings alike. Codes can confirm at 615-862-6500.
Historic overlaysCheck the panel firstThe Historic Zoning Commission’s metal roofing guide ranks mechanically seamed standing seam first, accepts low-profile snap-lock and 5-V in every district, and doesn’t approve tall-seam snap-lock or metal made to look like wood, slate or tile. Call 615-862-7970 before you order.
Wind and snow loadsOff your plansMetro sets these in its local amendments, so take them from the stamped plans. If the plans call out an uplift rating, send that sheet with your takeoff.

Which of our panels fit Nashville work

1.5″ snap lock (SS4-450)

24 ga Kynar 500 · 26 ga SMP or Galvalume

The everyday panel for porch roofs, bays and full roofs on new houses. In a historic overlay, ask the commission about seam height before you order.

2″ mechanical seam (SSQ210)

Seamed on the roof

For low slopes, long runs and commercial roofs. It’s also the kind of panel the historic guide ranks first, because the seam gets rolled closed on the roof.

1″ flush wall (FWQ100)

Wall, soffit and underdeck

Accent walls, soffits and porch ceilings in the same color as the roof.

Coping and parapet trim

Bent to your dimensions

For flat commercial roofs. Send the wall width and a sketch, and we’ll bend coping and counter flashing to match the panels.

Clips, screws and high-temp underlayment ship on the same order.

Nashville FAQ

Questions from Nashville roofers

Do you deliver metal roofing panels in Nashville?

Yes. We deliver to job sites across Davidson County, from Antioch up to Whites Creek, or you can pick up at the shop at 9485 Lebanon Rd in Mt. Juliet. Most panel orders are ready in 1 to 2 days.

Does Metal Formers install metal roofs in Nashville?

No. We form standing seam panels and bend trim, and we sell them to roofers and builders. If you’re a homeowner, your roofer can order from us.

Do I need a permit for a metal roof in Nashville?

Metro Codes’ permit list says a new layer of roofing, or replacing more than a third of the roof, needs a permit. That goes for houses and commercial buildings. If you’re not sure, call Codes at 615-862-6500.

Can I put standing seam on a house in a historic overlay?

Usually, if it’s the right panel. The Metro Historic Zoning Commission’s metal roofing guide ranks mechanically seamed standing seam first and accepts low-profile snap-lock and 5-V in every district. It doesn’t approve snap-lock with tall seams or metal made to look like wood, slate or tile. Call the commission at 615-862-7970 before you order.

Which building code does Nashville use?

Metro adopted the 2024 IBC, IRC and IEBC with local amendments in ordinance BL2025-898. They apply to plans submitted after July 16, 2025.

Can you bend coping and parapet flashing for a flat roof?

Yes. Send the wall width and a sketch, and we’ll bend coping, counter flashing and parapet trim to match the panels on the job.

Can you roll long panels on a Nashville jobsite?

Yes. If the coil can be delivered to your site, we’ll bring the portable roll former and run the panels there. It saves hauling long panels across town. See jobsite panel runs.

How do I place an order?

Send a takeoff or cut list with an order form, or call Amy at 615-961-8470, Monday to Friday, 7 AM to 4 PM.

Nearby

Around Davidson County

Same trucks, same lead time.

  • East Nashville
  • North Nashville
  • Bordeaux
  • Whites Creek
  • Joelton
  • Goodlettsville
  • Madison
  • Inglewood
  • Old Hickory
  • Hermitage
  • Donelson
  • Antioch
  • Bellevue
  • Belle Meade
  • Forest Hills
  • Oak Hill
  • Berry Hill

Other town pages

Every town we deliver to
Ready to price it?

Send us your Nashville takeoff

Call Amy at the shop Monday to Friday, 7 AM to 4 PM, or send your takeoff with an order form. Want to see the color first? Request a sample. En español: metalformersinc.com/es.

615-961-8470